Filter
Top Products
10
On the Index (triple-image)
screen
a Set the MODE dial to , then
press the SMART ZOOM W
button twice to switch to the
Index (triple-image) screen.
b Move the image you want to
send to the center with b/B.
c Press Bluetooth.
The Bluetooth menu appears.
<Sending camera>
d Select [SEND] with V, then
press z.
The Bluetooth function starts up and
the SELECT THE RECEIVER screen
appears.
e Display the record of the
receiving camera with b/B or
perform a new search (page 7).
f Select [CONNECT] with v, then
press z.
“SENDING” is indicated and the
selected image is sent to the receiver
camera.
<Sending camera>
<Receiving camera>
• If passkey entry is required on the sending
and receiving cameras, enter the passkey
(page 17).
• If you run past the time limit for the
passkey entry (30 seconds), connect again.
g To send other images, move
the desired image to the center
with b/B, then press z.
To cancel the sending operation
Sending Camera
Select [EXIT], then press z in Step 6 or
7. The Bluetooth function is turned off
and the Bluetooth menu appears again.
Sending images to a
Sony VAIO
MODE dial:
You can send images to a VAIO equipped
with the BIP-compatible Bluetooth
function.
• For the latest information about
connection using a VAIO, see the
following URL: http://www.sony-
imaging.com/support/
• You can also operate with the index (nine- or
triple-image) screen.
• For the image types you can send, see page 19.
OK BACK/NEXT
101-0012 2003 10:30
AM
74
SEND
RECEIVE
PRINT
EXIT
SENDING
OK
SONY Cyber–shotX
60
min
EXIT
RECEIVING
SONY Cyber–shot
00:0C:3E:3A:4B:69
OK
60
min
0/0
101
MODE dial
Control button
Bluetooth