Filter
Top Products
116
Black bands appear when you record a TV screen or computer screen.
• Set [STEADYSHOT] to [OFF] (p.75).
The supplied Remote Commander does not function.
• Set [REMOTE CTRL] to [ON] (p.83).
• Insert a battery into the battery holder with the +/– polarities correctly matching the +/– marks
(p.141).
• Remove any obstructions between the Remote Commander and the remote sensor.
• Point the remote sensor away from strong light sources such as direct sunlight or overhead
lighting. Otherwise, the Remote Commander may not function properly.
• Remove the conversion lens (optional) as the remote sensor may be obstructed by it.
Another DVD device malfunctions when you use the supplied Remote
Commander.
• Select a commander mode other than DVD 2 for your DVD device, or cover the sensor of your
DVD device with black paper.
You cannot play back a disc.
• Slide the POWER switch to turn on your camcorder and press PLAY/EDIT.
• Check out the disc compatibility (p.16).
• Insert a disc with the recording side facing your camcorder (p.29).
• The disc recorded in other devices may not be played back on your camcorder.
The playback picture is distorted.
• Clean the disc using the cleaning cloth (supplied, p.134).
Still images stored on a “Memory Stick Duo” are not played back in the actual
size (For DCR-DVD305/DVD755).
• Still images recorded on other devices may not appear in the actual size. This is not a malfunction.
Still images stored on a “Memory Stick Duo” cannot be played back (For DCR-
DVD305/DVD755).
• Still images cannot be played back if you have modified files or folders, or have edited the data
on a computer. (The file name flashes in that case.) This is not a malfunction (p.136).
• Still images recorded on other devices may not be played back. This is not a malfunction (p.136).
“ ” is indicated on an image in the VISUAL INDEX screen.
• Clean the disc using the cleaning cloth (supplied, p.134).
• Loading of the data may have failed. It may be indicated correctly when you turn off the power
and then turn it on again, or remove the disc once and set it again.
Remote Commander (DCR-DVD305/DVD755)
Playing back a disc on your camcorder
Troubleshooting (continued)