Filter
Top Products
83
Using the Setup items
You can select the number of thumbnails that
appear on the VISUAL INDEX screen.
Thumbnail Glossary (p.147)
BZOOM LINK
Change the number of thumbnails (6 or 12)
with the zoom lever on your camcorder.*
6IMAGES
Displays thumbnails of 6 images.
12IMAGES
Displays thumbnails of 12 images.
* You can operate with the zoom buttons on the
LCD frame or on the Remote Commander
(For DCR-DVD305/DVD755).
Because the default setting is [ON], when
you select tab on the VISUAL INDEX
screen the first 5 seconds of each movie
displayed on the screen are played back in
sequence.
• Set to [OFF] to conserve battery power.
• Playback for the movie stops after repeating 5
times.
BAUTO
Displays the remaining disc indicator for
about 8 seconds in situations such as those
described below.
– When your camcorder recognizes the
remaining disc capacity with the POWER
switch set to (Movie).
– When you press DISP/BATT INFO to
switch the indicator from off to on with
the POWER switch to (Movie).
– When the recordable time for movies is
less than 5 minutes.
– When you start recording from the line
input (For DCR-DVD305/DVD755).
ON
Always displays the remaining disc
indicator.
The default setting is [ON] so that you can
use the supplied Remote Commander (p.53).
• Set to [OFF] to prevent your camcorder from
responding to a command sent by other device’s
remote control.
• The setting returns to [ON] when you set the
POWER switch to OFF (CHG) for more than 12
hours.
BON
A melody sounds when you start/stop
recording, or operate the touch panel.
OFF
Cancels the melody.
BLCD PANEL
Shows displays such as the counter on the
LCD screen and in the viewfinder.
V-OUT/PANEL
Shows the display also on the TV screen.
BNORMAL
Scrolls the setup items downwards by
touching .
OPPOSITE
Scrolls the setup items upwards by touching
.
DISPLAY
MOVIE PB
REMAINING
REMOTE CTRL (Remote control)
(DCR-DVD305/DVD755)
BEEP
DISP OUTPUT
SETUP ROTATE