Filter
Top Products
134
See page 16 for the details of discs
which you can use with your
camcorder.
Notes on use
• Hold the disc by its edge while supporting
the center hole lightly. Do not touch the
recording side (the opposite of the printed
side when using a single-sided disc).
• Before shooting, be sure to remove dust and
fingerprints from the disc with the cleaning
cloth supplied with your camcorder.
Otherwise you may not be able to record or
play normally in some situations using that
disc.
• When you set the disc in your camcorder,
press firmly until it clicks. When the
message [C:13:ss] appears on the LCD
screen, open the disc cover and set the disc
again.
• Do not attach any adhesive material such
as a sticker on the surface of a disc. If you
do so, the disc may become unbalanced,
and this may cause a malfunction of the disc
or your camcorder.
Care and storage of the discs
• Keep the disc clean, or the quality of the
audio and video output may deteriorate.
• Clean the disc with the supplied cleaning
cloth.
Wipe the disc from the center out. For dirt,
clean the disc with a soft cloth slightly
moistened in water, then remove the
moisture with a soft, dry cloth. Do not use
solvents such as benzine, cleaners intended
for vinyl LPs or antistatic splay, as they may
cause a malfunction to the disc.
• Do not expose the disc to direct sunlight or
leave it in a humid place.
• When you carry or store the disc, put it in
its case.
• When you want to write letters or marks,
etc. on a single-sided disc, write only on the
printed side using an oil-based marker with
a felt-tip, and do not touch the ink until it
dries. Do not heat the disc or use a sharp-
pointed tool, such as ball point pen. Do not
dry the surface by heating. You cannot write
on, or mark, on the double-sided discs.
About the disc