Filter
Top Products
160
You can duplicate selected scenes (programs) for editing onto a “Memory Stick.”
Making the program
Before operation
Insert a “Memory Stick” and a recorded tape into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press MENU, then turn the SEL/PUSH EXEC dial to set VIDEO EDIT in
to MEMORY, then press the dial (p.217).
(3) Turn the SEL/PUSH EXEC dial to select IMAGESIZE and select the desired
image size, then press the dial.
(4) Search for the beginning of the first scene you want to insert using the video
operation buttons, then pause playback.
You can fine-adjust one frame at a time with EDITSEARCH.
(5) Press MARK on the Remote Commander, or turn the SEL/PUSH EXEC dial to
select MARK, then press the dial.
The IN point of the first program is set, and the top part of the program mark
changes to light blue.
(6) Search for the end of the first scene you want to insert using the video
operation buttons, then pause playback.
You can fine-adjust one frame at a time with EDITSEARCH.
(7) Press MARK on the Remote Commander, or the SEL/PUSH EXEC dial.
The OUT point of the first program is set, then the bottom part of the program
mark changes to light blue.
(8) Repeat steps 4 to 7, then set the program.
When one program is set, the program mark changes to light blue.
You can set 20 programs in maximum.
5
7
8
4,6
PAUSE
STOP
REW FFPLAY
320
320
320
VIDEO EDIT
MARK
UNDO
ERASE ALL
START
IMAGESIZE
1 OUT
0
:
08
:
55
:
06
TOTAL 0
:
00
:
00
SCENE 0 2min
TOTAL 0
:
00
:
12
SCENE 1 2min
TOTAL 0
:
00
:
31
SCENE 3 2min
[
MENU
]
:
END
VIDEO EDIT
MARK
UNDO
ERASE ALL
START
IMAGESIZE
2 IN
0
:
08
:
58
:
06
[
MENU
]
:
END
VIDEO EDIT
MARK
UNDO
ERASE ALL
START
IMAGESIZE
4 IN
0
:
10
:
01
:
23
[
MENU
]
:
END
N X
N X N X
MENU
Recording edited pictures from a tape as
a moving picture – Digital program
editing (on a “Memory Stick”)