Filter
Top Products
106
Superimposing a still picture in a “Memory Stick” on a moving
picture – MEMORY MIX
Before operation
•Insert a mini DV tape for recording into your camcorder.
•Insert a recorded “Memory Stick” into your camcorder.
(1) Set the POWER switch to CAMERA.
(2) Press MEMORY MIX in the standby mode.
The last recorded or last composed image appears on the lower part of the
screen as a thumbnail image.
(3) Press MEMORY+/– to select the still picture you want to superimpose.
To see the previous image, press MEMORY –. To see the next image, press
MEMORY+.
(4) Turn the SEL/PUSH EXEC dial to select the desired mode.
The mode changes as follows:
M.CHROM t M.LUMI t C.CHROM t M. OVERLAP
(5) Press the SEL/PUSH EXEC dial.
The still picture is superimposed on the moving picture. Your camcorder
automatically returns to the standby mode.
(6) Turn the SEL/PUSH EXEC dial to adjust the effect.
When M.OVERLAP is selected, no adjustment is necessary.
(7) Press START/STOP to start recording.
1
2
4
5
6
1
M. CHROM
M. LUMI
M. LUMI
M. LUMI
III¥¥¥¥
I¥¥¥¥¥¥
3
MEMORY MIX
VCR
OFF
(
CHG
)
MEMORY
CAMERA
POWER
Still picture