Filter
Top Products
95
“Memory Stick” Operations
Using a “Memory Stick” – introduction
Inserting a “Memory Stick”
(1) Slide MEMORY OPEN in the direction of the arrow. The “Memory Stick”
compartment opens.
(2) Insert a “Memory Stick” in as far as it can go with its rounded corner facing
up.
Then, close the “Memory Stick” compartment.
Ejecting a “Memory Stick”
Open the “Memory Stick” compartment in step 1, press MEMORY RELEASE. The
“Memory Stick” comes out.
When the access lamp is lit or flashing
Never shake or strike your camcorder. Do not turn the power off , eject a “Memory
Stick” or remove the battery pack. Otherwise, the image data breakdown may occur.
12
MEMORY OPEN
“Memory Stick” compartment
Access lamp
MEMORY RELEASE