Filter
Top Products
69
Editing
Using the i.LINK cable (DV connecting cable)
Simply connect the i.LINK cable (DV connecting cable) (not supplied) to DV IN/OUT
and to DV IN/OUT of the DV products. With digital-to-digital connection, video and
audio signals are transmitted in digital form for high-quality editing.
(1) Insert a blank tape (or a tape you want to record over) into your camcorder,
and insert the recorded tape into the VCR.
(2) Set the POWER switch to VCR on your comcorder.
(3) Set DISPLAY in
to LCD in the menu settings (p. 76).
(4) Press z REC and the button on its right simultaneously on your camcorder,
then immediately press X on your camcorder.
(5) Press N on the VCR to start playback. The picture to be recorded appears on
the LCD screen or in the viewfinder.
(6) Press X on your camcorder at the scene where you want to start recording
from.
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
Using the Remote Commander
(DCR-TRV11/TRV20 only)
In step 4, press z REC and MARK simultaneously, then immediately press X. And in
step 6, press X at the scene where you want to start recording from.
Recording video or TV programs
DV IN/OUT
: Signal flow
S VIDEO LANC
DV
REC
4
PAUSE