Filter
Top Products
Miscellaneous
Precautions
22
1
Pull the lever toward you to open the front cover.
2
Wipe the thermal head with the wet pad.
Note
Before wiping the thermal head, touch the metallic
part of the unit to remove static electricity from
your body.
Notes
• Be careful not to touch the surface of the thermal
head with your hand.
• Do not discard the wet pad. This wet pad is used
for the cleaning tasks to be performed on other
parts of the unit.
• Since the thermal head is still very hot just after
printing is finished, be careful not touch the
thermal head. Touching the hot thermal head may
cause a burn.
3
Wipe the platen roller (black rubber roller) gently.
4
Wipe the pinch roller (dark blue rubber roller).
5
Close the front cover.
6
Remove the film tray.
You can remove the film tray without pushing the
EJECT TRAY button when the power is off.
Wipe the surface of the thermal head gently
with the wet pad.
Thermal head
Wipe the platen roller gently with the wet pad
while turning it.
Platen roller (black rubber roll)
Pinch roller (dark blue rubber roller)
Wipe the pinch roller gently with the wet pad
while turning it.