Filter
Top Products
NetCam Page 31
, = pause one second
# = same as # button on phone
* = same as * button on phone
Timeout
NetCam will attempt to dial up the ISP for the specied number of
seconds. If NetCam is unable to connect during this time period, it will
stop and start over again.
Default: 180
Username
The username or login assigned to you by your ISP.
Password
The password assigned to you by your ISP.
Default Connection
Enabling this option makes the ISP dial-out connection NetCam’s
default connection to the Internet.
Default: On
Always Up
If enabled, NetCam will attempt to stay continuously connected to
the Internet. If disconnected, it will automatically attempt to reconnect. If
NetCam is congured to upload images to a server via FTP, it is not necessary
to enable this option; NetCam will automatically attempt to dial into the
Internet when an image is scheduled to upload if dial-out is enabled. If your
NetCam is set to FTP images, it is recommended that you do not enable this
option but rather let the FTP upload schedule keep the camera online.
Default: Off
Send CR After Login
This advanced ISP option tells NetCam to send a CR (Carriage Return)
after logging in. Most ISP’s do not require this.
Default: Off
Shell Login
This advanced ISP option tells NetCam to perform a shell login. Most
ISP’s do not require this.
Default: Off