Filter
Top Products
42
SMART Information
The SMART Information tab displays Hard Drive information.
SMART Alert
Configure the SMART Alert tab to send an email to users set up to
receive Smart Alert emails. This will also cause the DVR to Beep or show
a Popup message on failure of the Smart Alert Check.
1. Setup the General and Users tabs first.
(see above)
2. Select the Enable SMART Alarm check box.
3. Define the number hours between SMART checks.
4. Select the type of SMART event to trigger an action.
5. Define the maximum HDD temperature.
6. Select an action method.
7. Click Apply.