Filter
Top Products
29944AG 73
FEATURES
The instructions below are for LDAP Integration with Server Software version 3.6.36 and above.
The recorder server does not need to be joined to the Domain. The recorder server will query the LDAP server for accounts and
authorization levels.
The recorder server creates groups within Active Directory for each of the permissions on the recorder. Simply join a Domain
user to these groups to provide access to that function in the recorder.
Recorder access within Active Directory is based on the Site Code within the recorder software. This allows an administrator to
group recorders with the same Site Code.
Remote and Multi-Site management software works with LDAP logins.
INSTALLING LDAP
Required Items
Name of LDAP server.
Account in LDAP server that has Domain Admin rights. This user will be used initially to create the OU’s and Groups within
Active Directory.
1. Verify that the recorder server is connected to a network that has a valid LDAP (Active Directory) server.
Ensure that the TCP/IP settings are configured correctly for DNS resolution and gateway if needed.
Check to verify that you can ping the LDAP server without issues.
2. Set up DVR Site Code to be used for LDAP authorization. The default will be 100-000. This site code can be used to group
recorders together within Active Directory.
a. Log in to the recorder using the local recorder administrator account (non-LDAP).
b. Navigate to the Setup -> Information tab and change the Site Code.
3. Log on to the recorder server with the domain account with administrator
privileges (see above required items).
If successful, the recorder will log the administrator user on without any
error messages. You may log off the recorder once this is completed
without errors.
Note If you encounter an error please verify that the above required
items are correct.