Filter
Top Products
20
Basic
Photography
Getting Ready
Playing/
Erasing Images
Connecting to
the PC
Other
Applications
Additional
Information
1
2
1
2
2
4
1
Inserting and Removing the SD card
• For details on handling the SD card, be sure to read page 14.
• Before you insert or remove the SD card, be sure to turn the camera off. If
the SD card is inserted or removed with the power ON, it may cause
malfunction and damage important data.
• This camera is incompatible with the MultiMediaCard
TM
.
Inserting SD card
1
Make sure that the camera power is turned OFF.
If the power is ON, turn it OFF.
☞ Turning the Power OFF ➲ page 21
2
Open the battery/SD card cover.
Slide the battery/SD card cover
1
, and open it
2
.
3
Make sure that the SD card is inserted in the correct
direction as shown in the figure 3 above.
Make sure that the card is inserted as far as it can go.
4
Close the battery/SD card cover.
Close the battery/SD card cover
1
, and slide it
2
.
Make sure that the battery cover is firmly closed.
Removing SD card
1
Make sure that the camera power is turned OFF.
If the power is ON, turn it OFF.
☞ Turning the Power OFF ➲ page 21
2
Open the battery/SD card cover, remove the SD card.
If you push SD card once in as far as it go, it will protrude slightly.
• Never open the battery/SD card cover or remove the batteries or the SD card
while data is being recorded to the SD card (indicator is lit red). This might
damage the SD card or important data in the SD card.
Important
Important
3