Filter
Top Products
28
Basic
Photography
Getting Ready
Playing/
Erasing Images
Other
Applications
Additional
Information
Connecting to
the PC
1
Touch the display key
[ ]
The photograph information is
displayed. With the default setting,
the information is displayed, so this
operation is unnecessary.
2
Touch the flash icon
[ ].
A list of flash selection icons are
displayed. When the flash icon
[
] is touched again, the displayed
list disappears and the original
settings are retained.
3
Select the optimum flash
for the photograph
conditions and touch the
corresponding icon.
The selected flash icon is displayed.
00120012
012
00120012
012
00120012
Setting the Flash
You can take a photo with the flash set.
In the default setting, the flash will be automatically set [
] to function in dark places.
The flash firing mode can be set to suit the conditions of photography.
The effective firing distance of the flash is approximately 0.4m to 2.0m.
In the photography mode...
☞ Switching the Mode ➲ page 23
Important
For descriptions of each flash setting, see page 29.
• If you take a photo in the Slow Sync [ ] mode at a place with a dark
background or in the Suppressed Flash [
] mode at a dark place, the
shutter speed slows down. To prevent shaking or movement, we recommend
that you place the camera on a stable surface.
• The flash settings are not canceled even if the power is turned OFF or the
Auto Power OFF function is activated.
Memo
• It may take a few seconds to charge the flash. The indicator blinks red and the
monitor turns OFF while the flash charging is in progress. Photography by
using the flash is not possible while the charging is in progress. Wait until the
charging is completed.