Filter
Top Products
TV-IP262PI
TRENDnet User’s Guide
© Copyright 2012 TRENDnet. All Rights Reserved.
18
Disable
RTSP link does not require authentication. No
username/password required.
sic
RTSP link prompts for authentication.
Username/password are transmitted in plain text.
Digest
RTSP link prompts for authentication.
Username/password are encrypted during data
transmission.
Group IP
Assign a category of IP addresses to receive the information
from the camera.
H.264 Port
Assign a multicast port for H.264 in the text box.
The default port is 1234.
MPEG4 Port
Assign a multicast port for MPEG4 in the text box.
The default port is 1236.
Audio Port
Assign a multicast port for audio in the text box.
The default port is 1238.
TTL
Set the TTL value from 1 to 255, which is used to modify
the time to live field in the IP header.
Network >>
Advanced
HTTPS
Enable: Select this option to enable HTTPS, which is a secure protocol to
provide authenticated and encrypted communication within your network.
HTTPS Port: Assign a HTTPS port in the text box. The default HTTPS port is
443
.
Bonjour: The devices with Bonjour will automatically broadcast their own
services and listen for services being offered for the use of others. If your
browser with Bonjour, you can find the camera on your local network without
knowing its IP address.
The Apple Safari is already with Bonjour. You can download the complete
Bonjour for Internet Explorer browser from Apple's web site by visiting
http://www.apple.com/bonjour/.
RTSP
RTSP Streaming: The camera supports three levels of RTSP access. The
default RTSP Port is 554.
TRENDnet recommends using RSTP Digest authentication method. Disable
and Basic methods pose security risks. Please verify if your RTSP client
supports RSTP authentication method selected.
Multicast settings: Configure the following settings so that you can deliver
information from your camera to a set of receivers.
QoS
Live Video DSCP: Assign the DSCP (DiffServ Code Point) of the stream video
from the camera.
Live Audio DSCP: Assign the DSCP (DiffServ Code Point) of the stream audio
from the camera.