TRENDnet TV-IP262PI Security Camera User Manual


 
TV-IP262PI
TRENDnet Users Guide
© Copyright 2012 TRENDnet. All Rights Reserved.
23
HTTP Notify For Motion Trigger Event Server Setting >> FTP
Send the query parameter via an HTTP notification when an event is triggered.
Host: Enter the IP of the HTTP server
Port: Enter the Port number of the HTTP server
User Name: Enter the username of the HTTP server
Password: Enter the password of the HTTP server
Query: Enter the query parameter for the request if necessary
Example:
Host: 192.168.10.1
Port: 80
Query: xxx.cgi?name1=value1&name2=value2
Example: cgi/event.cgi?status=#s&time=#t&model=modelname
Result: http://192.168.10.1:80/cgi/event.cgi?status=#s&time=#t&model=modelname
FTP
Host Address: Enter the IP address of the target FTP server.
Port Number: Enter the port number used for the FTP server.
User Name: Enter the user name to login into the FTP server.
Password: Enter the password to login into the FTP server.
Directory Path: Enter the destination folder for uploading the images. For
example, /TV-IP262P.
Passive Mode: Select the Enable option to enable passive mode.
FTP Upload With: Set the format of the image that is to be uploaded to the
FTP server. You can set the format as One Snapshot or images containing
Pre-event (0 ~ 3) seconds and Post-event (0 ~ 3) seconds.
NOTE: The Pre-Event or Post-Event only works when video resolution set
up to 720P or lower. It will not work with SXGA resolution.