Filter
Top Products
EN-14
User’s Manual
Projector
Focusing and Sizing the Projected Image
When the projected image appears on the screen, adjust the focus and size:
To adjust the focus, rotate the focus ring, which is the outer ring on the
projector lens (Page 6, item 2)
To adjust the size of the image, rotate the zoom ring (Page 6, item 1); zooming out
to make the image larger or zooming in make it smaller on the screen
Operational Indicators (LEDs)
There are two LEDs on the top of the projector; the POWER LED and the LAMP LED.
They provide valuable information about the projector:
LED COLOR STATUS MEANING
Power Green Solid The projector is powered and ready
Power Red Flashing There is a problem with the projector
fan - the projector cannot start up
Power Red Solid When Main Power is turned on - 1 second
Lamp Green Solid The lamp is in good condition and is
projecting at maximum brightness
Lamp Green Flashing The lamp is close to its end of life, but
the lamp is still operational
Lamp Red Solid The lamp has reached its end of life and
must be changed soon. The lamp will
continue to operate until it fails. Change the
lamp and reset the lamp time-counter.
Lamp Orange/ Flashing The projector is shutting down. The fan
Yellow motor is cooling the lamp for shutdown.
Do not unplug the power cable or turn the
power (rocker) switch Off before the Lamp
LED turns off. The fan motor will turn off
when the lamp has cooled.