Filter
Top Products
EN-8
User’s Manual
Projector
Remote Control
Button Function
POWER Turns the projector and lamp On and OFF
MENU Displays (or hides) the on-screen control menus
LASER Fires laser pointer (press and hold)
WINDOW Adjusts Window size while in PIP mode
AUTO Automatically adjusts frequency and phase
(To adjust manually - press enter, Menu/Computer/Tracking,
Sync, PosiH, PosiV to fine tune.)
COMPUTER Selects computer input signal (computer, DVI, or HDTV)
VIDEO Selects video input signal (YCbCr, S-Video, Video)
PIP Picture-in-Picture: displays a second image window
POINTER Displays pointer icon on the screen
Confirms the current setting
ESC Deselects the current setting and exits a menu
KEYSTONE Adjusts trapezoidal distortion of the projection that may occur
depending on the horizontal projection angle
VOLUME Adjusts the volume of the projectors speakers
FREEZE Freezes the current graphics and
video image on the screen
BLANK Cuts off the screen temporarily
D ZOOM Digitally zooms the current image window
MUTE Temporarily cuts-off the projector speakers
LANGUAGE Selects the desired OSD (On-Screen
Display) language
THUMB PAD The thumb pad is a thumb-activated
navigational controller. It acts like a small
joystick or game controller. Pressing the pad
forward or backward allows you to
navigate up and down the projector menus.
If your projector is equipped with an optional
mouse link cable, the controller pad will
function as a remote mouse for your PC.