McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 27
b. RADIUS Local — attempts to authenticate using the RADIUS server. If the switch can not contact the
RADIUS server due to a network or some other problem, the switch will authenticate using the local
password database.
12.Click Close to close the Radius Server Information dialog.
Removing a RADIUS server
When you remove a RADIUS server, you disable the management of authentication usernames and
passwords over the network for that server.
Figure 11 RADIUS Server Information dialog — Remove Server tab page
To remove a RADIUS server, perform the following procedure:
1. Select Switch > Radius Servers in the faceplate display.
2. Click the Remove Server tab in the Radius Server Information dialog shown in Figure 11.
3. Select the server to be removed in server list at the top of the dialog.
4. Click Remove Server to remove the server.
5. Click Close to close the Radius Server Information dialog.
