Filter
Top Products
Camera interfaces
OSCAR Technical Manual V2.4.0
48
Figure 16: Output impulse diagram
Note
L
The signals can be inverted.
Note
L
• Note that trigger delay in fact delays the image cap-
ture whereas the IntEna_Delay only delays the leading
edge of the IntEna output signal but does not delay the
image capture.
• As mentioned before, it is possible to set the outputs
by software. Doing so, the achievable maximum fre-
quency is strongly dependent on individual software
capabilities. As a rule of thumb, the camera itself will
limit the toggle frequency to not more than 700 Hz.
•In split shutter mode the camera will issue two (Oscar
F-810C: three) IntEnas and FrameValids but only one
Busy, because it integrates the two (Oscar F-810C:
three) fields separately.