Filter
Top Products
Upgrades AirPort Card - 6
2. Insert the AirPort card,
barcode side facing up,
through the opening in
the PCI card guide and
into the connector on the
logic board.
3. Connect the antenna
cable to the conector on
the end of the AirPort
card.
Important:
After installing
an AirPort card on a new,
out-of-the-box Power Mac
G4 running Mac OS 9, you
must press Option-S when
restarting the computer.
This ensures the customer
Plug the
antenna wire
into the hole
in the end of the
AirPort Card.
The antenna
wire is stowed
here when not
in use.
AirPort Card
(Barcode side
should face up.)