Filter
Top Products
23
GETTING ACQUAINTED
Turning the Camera On and Off
Use the POWER ON/OFF switch to turn the camera on and
off. Sliding the POWER ON/OFF switch in the direction indi-
cated by “ ” toggles power on and off. The operation lamp
is lit while camera power is turned on.
Be sure to turn off power before connecting or disconnect-
ing the adaptor.
Always turn camera power off before disconnecting the AC
adaptor, even if the camera has batteries installed. If you
don’t, the camera will turn off automatically when you dis-
connect the AC adaptor. You also run the risk of damaging
the camera whenever you disconnect the AC adaptor with-
out first turning power off.
The AC adaptor may become warm to the touch after ex-
tended periods of use. This is normal and is not cause for
alarm.
After using the camera, turn it off and unplug the adaptor
from the AC outlet.
The camera automatically switches over to AC adaptor
powered operation whenever the AC adaptor is plugged
into the camera.
Always use the AC adaptor to power the camera whenever
it is connected to a computer.
POWER ON/OFF
¥¼©R¦W-3 2002/6/18, AM 10:56Page 23 Adobe PageMaker 6.5C/Win