Filter
Top Products
35
RECORDING IMAGES
Using the Optical Viewfinder
Note the following points whenever you use the optical
viewfinder to compose images.
The frame that is visible inside of the viewfinder indicates the
image recorded at a distance of about three meters (9.8`).
When the subject is closer or further away than three meters
(9.8`), the recorded image will be different from what you
see inside the viewfinder frame.
When your subject is closer than three meters (9.8`), set
the Normal/Macro selector to and use the macro mode
to record. Note that selecting the macro mode automati-
cally turns on the monitor screen, which you should use to
compose the image.
You can turn off the monitor screen by setting the mode
selector to FINDER.
Pressing MENU while the mode selector is set to
FINDER causes the monitor screen indicators to appear.
No settings besides the flash mode can be changed while
the mode selector is set to FINDER.
Recording Consecutive Images
(Continuous Shutter Mode)
Using the following procedure, you can record up to five
consecutive images by holding down the shutter release
button.
1. Align the mode selector with LCD.
2. Press MENU.
3. Use [ ] and [ ] to select “DRIVE MODE” and then
press SET .
4. Use [ ] and [ ] to select “CONTINUOUS” and then
press SET .
The following describes the drive mode options.
To do this:
Record a series of up to five images
Record a single snapshot
Select this option:
CONTINUOUS
SINGLE
Optical viewfinder
¥¼©R¦W-4 2002/6/18, AM 11:11Page 35 Adobe PageMaker 6.5C/Win