Filter
Top Products
87
REFERENCE
This camera does not have a separate battery to power its clock.
Clock settings are cleared whenever power to the camera is cut off
(by batteries going dead while the camera is not connected to an
AC power outlet with the AC adaptor) for about 12 hours. After
power is resumed, either by loading fresh batteries or connecting to
an AC power outlet, you will have to set the correct date and time
again.
The liquid crystal panel built into this camera is the product of pre-
cision engineering, with a pixel yield of 99.99%. This also means,
however that 0.01% of the pixels can be expected to fail to light or
to remain lit at all times.
¥¼©R¦W-10 2002/6/18, AM 11:46Page 87 Adobe PageMaker 6.5C/Win