Filter
Top Products
24
GETTING ACQUAINTED
Power Save Settings
The camera performs the following power save operations
to conserve battery power.
Auto Power Off :Automatically turns off the camera if no op-
eration is performed for five minutes.
Sleep :Automatically turns off the monitor screen if
no operation is performed for two minutes.
Performing any button operation causes
the monitor screen to turn back on.
Auto Power Off is automatically disabled under any
one of the following conditions.
--- While a slideshow is playing
--- While the camera’s USB port is connected to a
computer or other external device, or while the
camera is being controlled by an external device
--- While the AC adaptor is connected to the camera
Setting the Current Date and Time
Use the following procedures to set the current date and
time, and to select the date format.
When you record an image, the date and time the image was
shot is registered in accordance with data from the camera’s
built-in clock.
IMPORTANT!
The date and time settings are cleared if the camera
is left for about 12 hours without battery and AC power
being supplied. If this happens, restore power and
make new date and time settings before using the
camera again.
The date and time setting screen appears first when
you turn on the camera after the date and time set-
tings are cleared.
If you do not set the camera’s built-in clock to the cur-
rent date and time, all images are recorded with the
default date and time, which probably is not your cor-
rect current date and time. Be sure to correctly set the
clock before you use the camera.
¥¼©R¦W-3 2002/6/18, AM 10:56Page 24 Adobe PageMaker 6.5C/Win