Filter
Top Products
IP Wireless Security
Camera
A02-IPCAM-W54_ME01
11
DC Power Connector
The DC power input connector is located on the IP Security Wireless Camera’s rear panel, and is
labeled DC 5V with a single jack socket to supply power to the IP Security Wireless Camera.
Power will be generated when the power supply is connected to a wall outlet.
Reset Button
Reset will be initiated when the reset button is pressed once, and Power LED begins to flash.
Factory Reset will be initiated when the reset button is pressed continuously for three seconds or
when Power LED begins to light up. Release the reset button and the Power LED will begin to
flash, indicating the IP Security Wireless Camera is changing to factory reset. When factory reset
is completed, the IP Security Wireless Camera will be set to default on channel 11 and ESS-ID is
set as “NULL String” (This default setting will let the IP Security Wireless Camera connect to ANY
access point on the infrastructure network). The IP address will also return to the default setting as
192.168.0.20.
Antenna Connector
There is the SMA type antenna connector located on the rear panel of the IP Security Wireless
Camera, providing connection for one high sensitivity antenna included in the package.
4.3 Top Panel