Filter
Top Products
AXIS Q1602 N etwork Camera
Events
Events
The Axis product can be configured to pe rfo rm actions when di ffe rent events occur, for exam ple , start a recording whe n motion is
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
• Applications — use ins talle d applications to trigger the r u le, see
Applications, on page 29
.
• Detectors
- Audio Detection — trigger the rule when audio is detected, see
Audio Detection, on page 28
.
- Motion Detection — trigger the rule when motion is detected , see
Motion Detection, on page 26
.
- Tampering — trigger the rule when tampering is detected, see
Camera Tampering, on page 26
.
• Hardware
- Network — trigger the rule if network connection is lost or restored. This can for example be used to start
recording to the SD card.
• Input Signal
- Digital Input Port — trig g er the rule when an I/O port receives a signal from a connected device, see
I/O
Ports, on page 42
.
- Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see
Controls on the
Live View Page, on page 10
. This c a n for example be used to validate a ctions during product installation
and configuration.
• Storage
- Available — trigger the rule when the storage device is unmounted or removed. This can for example be
used to send maintenance notifications.
- Full — tr igger the rule when the storage device is full. Under normal opera tion, the oldest r ecor dings will be
overwritten to prevent the storage device from b
ecoming full.
- Locked —triggertheruleifthe
storagedeviceislocked(writeprotected).
• System
- System Initializi
ng — trigge r the rule when the product is being started. This can for example be used to send a
notification when the product restarts.
• Time
- Recurrence — trigger the rule periodically, see
Recurrences, on page 32
. This can for example be used to
upload an image every 5 minutes.
- Use Schedule — trigger the rule according to the selected sche dule, see
Schedules, on page 32
.
Available actions include:
• Day/Night Vision M ode —setdaymode(IRcutfilter on) or night mode (IR cut filter off).
• Output Port — activate a n I/O port to control an external device.
• Play Audio Clip —see
Audio Clips, on page 21
.
• Record Video — record video to a selected storage.
• Send Images —sendimagestoarecipient.
30