Filter
Top Products
101
If the image comes out dark or the contrast is low, the brightness and
contrast can be corrected automatically. The default setting is [
Standard
].
With JPEG images, the correction is done when the image is captured.
1
Select [Auto Lighting Optimizer].
Under the [2] tab, select [Auto
Lighting Optimizer], then press
<0>.
2
Set the correction setting.
Select the desired setting, then press
<0>.
3
Take the picture.
The image will be recorded with the
brightness and contrast corrected if
necessary.
3 Auto Lighting OptimizerN
With correctionWithout correction
If [8C.Fn II -3: Highlight tone priority] is set to [1: Enable], the Auto
Lighting Optimizer will be set automatically to [Disable] and you cannot
change this setting.
Depending on the shooting conditions, noise might increase.
If a setting other than [Disable] is set and you use exposure
compensation, flash exposure compensation, or manual exposure to
darken the exposure, the image might still come out bright. If you want a
darker exposure, set this to [Disable] first.
In Basic Zone modes, [Standard] is set automatically.
COPY