Canon 4460B003 Digital Camera User Manual


 
130
In Basic Zone modes and Creative Zone modes, the shutter speed and
aperture for flash photography will be set as shown below. By default,
E-TTL II autoflash control (flash autoexposure) will be used in all shooting
modes.
D Using the Built-in Flash
Shooting
Mode
Shutter Speed Aperture
1 C
24
Automatically set within 1/250 sec. - 1/60 sec. Automatically set
6 Automatically set within 1/250 sec. - 2 sec. Automatically set
d Automatically set within 1/250 sec. - 1/60 sec. Automatically set
s Set manually within 1/250 sec. - 30 sec. Automatically set
f Automatically set Set manually
a Set manually within 1/250 sec. - 30 sec. Set manually
F
While you hold down the shutter button, the
exposure will continue.
Set manually
With [8C.Fn I -7: Flash sync. speed in Av mode] (p.253), the following
options for flash automatic setting can be selected: Applicable in the <f>
shooting mode.
• 0: Auto*
• 1: 1/250 - 1/60 sec. auto
• 2: 1/250 sec. (fixed)
* Normally, the sync speed is set automatically within 1/250 sec. to 30 sec.
to suit the ambient brightness. In low light, the main subject is exposed
with the automatic flash, and the background is exposed with a slow
shutter speed set automatically. The standard exposure will be obtained
for both the subject and the background (automatic slow flash sync
speed). With slow shutter speeds, using a tripod is recommended.
COPY