Filter
Top Products
128
Q Displaying the Electronic Level
The electronic level display in the viewfinder and on the LCD panel
uses the exposure level scale. Note that the electronic level is only
displayed when shooting in horizontal orientation. It is not displayed in
vertical orientation.
1
Select Custom Functions IV.
Select the [8C.Fn IV: Operation/
Others] menu, then press <0>.
2
Select C.Fn IV -2 [Assign SET
button].
Press the <U> key to select [2]
[Assign SET button], then press
<0>.
3
Select [
5
]: [
sViewfinder
Q
].
Press the <U> key to select [5]:
[sViewfinder Q], then press
<0>.
Press the <M> button two times to
exit the menu.
4
Display the electronic level.
Press <0>.
X
In the viewfinder and on the LCD panel,
the electronic level will use the
exposure scale to display the horizontal
tilt up to ±9° in 1° increments.
Pressing the shutter button halfway
will switch the exposure level scale
back to indicating the exposure level.
Displaying the Electronic Level in the Viewfinder
4° right tilt 4° left tilt
Even when the tilt is corrected, there still may be a margin of error of ±1°.
If you point the camera up or down, the electronic level will not be
correctly displayed.
COPY