Filter
Top Products
274
Using Eye-Fi Cards
4
Display the connection
information.
Select [Connection info.], then press
<0>.
5
Check the [Access point SSID:].
Check that an access point is
displayed for [Access point SSID:].
You can also check the Eye-Fi card’s
MAC address and firmware version.
Press the <M> button three times
to exit the menu.
6
Take the picture.
X The images will be displayed.
For transferred images, O is
displayed in the detailed information
display (p.191).
H (Gray) Not connected : No connection with access point.
H (Blinking) Connecting : Connecting with access point.
H (Displayed) Connected: Connection to access point established.
H ( ) Transferring : Image transfer to access point in
progress.
* To check the Eye-Fi card’s transmission status as listed above, press the
<B> button to display the shooting settings (p.267).
Transmission status icon
COPY