Filter
Top Products
177
k Shooting Movies
The final image simulation reflects the effects of the Picture Style, white
balance, etc., in the Live View image so you can see what the captured
image will look like. During movie shooting, the Live View image will
automatically reflect the settings listed below.
Final image simulation for movies
Picture Style
* All settings such as sharpness, contrast, color saturation, and color tone will
be reflected.
White balance
Exposure
Depth of field
Auto Lighting Optimizer
Peripheral illumination correction
Highlight tone priority
Final Image Simulation
One continuous movie will be recorded as one file.
Monaural sound is recorded by the camera’s built-in microphone (p.172).
Stereo sound recording is possible by connecting an external
microphone (commercially available) equipped with a stereo mini plug
(3.5mm dia.) to the camera’s external microphone IN terminal (p.16).
Movie-related settings are under the [n], [o], and [Z] menu
tabs (p.182).
You can use Remote Controller RC-6 (sold separately, p.126) to start and stop
the movie shooting if the drive mode is <
Q
> or <
k
>. Set the shooting timing
switch to <
2
> (2-sec. delay), then press the transmit button. If the switch is set to
<
o
> (immediate shooting), still photo shooting will take effect.
With a fully-charged Battery Pack LP-E6, the total shooting time will be
as follows: At 23°C/73°F: Approx. 2 hours, At 0°C/32°F: Approx. 1 hr. 40
min.
COPY