Filter
Top Products
78
Select one of the nine AF points to autofocus. Note that in Basic Zone
modes, you cannot select the AF point since it is selected automatically.
1
Press the <S> button. (9)
X The selected AF point will be
displayed in the viewfinder and on the
LCD panel.
When all AF points light up in the
viewfinder, automatic AF point
selection will be set.
2
Select the AF point.
Pressing <0> toggles the AF point
selection between the center AF point
and automatic AF point selection.
When you turn the <6> or <5>
dial, the AF point selection will
change in the respective direction.
When all AF points light up, automatic
AF point selection will be set.
The AF point selection will change in
the direction you tilt the <9>. If you
keep tilting <9> in the same
direction, it will toggle between
manual and automatic AF point
selection.
Press <0> to select the center AF
point.
S Selecting the AF Point N
Selecting with the Dial
Selecting with the Multi-controller
COPY