Filter
Top Products
107
You can adjust the flash output in 1/3-stop increments in the range of -2 to +2.
Choose the amount of flash
exposure compensation.
z After pressing the r button, immediately
turn the y ring to choose the amount of
flash exposure compensation, then press
the m button.
XOnce set, X will appear on the screen.
You can automatically correct red-eye that occurs in images taken with the
flash.
Choose [Flash Settings].
z Press the n button to choose [Flash
Settings] in the 4 tab, then press the m
button.
Adjusting the Flash Exposure
Compensation
Safety FE
The camera automatically changes the shutter speed or aperture value when the
flash fires to avoid overexposing and blowing out the highlights in the scene.
However, if you press the n button to display the 4 tab and set [Safety FE]
in [Flash Settings] to [Off], the shutter speed and aperture value will not
automatically adjust.
You can also set the flash exposure compensation with the following
methods.
• Press the n button to choose [Flash Settings] (see below) in the 4 tab,
then choose [Flash Exp. Comp] and press the qr buttons.
• Press the r button, then the n button, and the setting screen will appear.
Choose [Flash Exp. Comp], then press the qr buttons.
Red-Eye Correction
COPY