Filter
Top Products
Changing Shooting Function Settings
186
z Choose [IS Settings], then press the m
button.
z Press the op buttons or turn the 7 dial
to choose [IS Mode], then press the qr
buttons to choose an option.
* Setting changes to [Continuous] when shooting
movies.
Turning Off the Powered IS Function
Powered IS reduces subtle camera shake when shooting movies at max.
telephoto. However, when shooting while walking, or during long panning
shots, you should set Powered IS to [Off], as it may cause unexpected results
in these situations.
z Choose [IS Settings], then press the m
button.
z Press the op buttons or turn the 7 dial
to choose [Powered IS], then press the qr
buttons to choose [Off].
• Gray items can also be set, however, they may not appear depending on
the Shooting mode.
• Grid lines will not be recorded on the image.
Changing the IS-Mode Settings
Continuous
Automatically sets the optimal
image stabilization for the scene
(Intelligent IS) (p. 207).
Shoot Only*
Image stabilization is only active
at the moment of shooting.
Off Turns off image stabilization.
If camera shake is too strong, attach the camera to a tripod. You should
also set the IS Mode to [Off] when the camera is attached to a tripod.
[Powered IS] settings will be disabled if [IS Mode] is set to [Off].
COPY