Filter
Top Products
183
If you set the mode dial to G, you can change the settings in the 4 tab
(p. 43).
The lamp will automatically light to assist focusing in low light conditions when
you press the shutter button halfway. You can turn off the lamp.
z Choose [AF-assist Beam], then press the
qr buttons to choose [Off].
You can change the timing of the flash and shutter.
z Choose [Flash Settings], then press the
m button.
z Press the op buttons or turn the 7 dial
to choose [Shutter Sync.], then press the
qr buttons to choose a setting.
Changing Shooting Function Settings
Before attempting to shoot using a function explained in this section in
modes other than G, check if the function is available in those modes
(pp. 216 – 219).
Turning Off the AF Assist Beam
Changing the Flash Timing
1st-curtain
The flash fires right after the
shutter opens.
2nd-curtain
The flash fires right before the
shutter closes.
COPY