Filter
Top Products
87
The camera can detect areas in the scene, such as faces or backgrounds,
that are too bright or dark and automatically adjust them to the optimum
brightness when shooting.
To suppress highlight blowout, Dynamic Range Correction is used. To bring
out shadow details, Shadow Correct is used.
You can choose from the following Dynamic Range Correction methods: ,
and .
Choose .
z After pressing the m button, press the
op buttons to choose .
Choose a setting.
z Press the qr buttons or turn the 7 dial to
choose an option, then press the m
button.
XOnce set, @ will appear on the screen.
Correcting the Brightness and Shooting
(i-Contrast)
• Under some conditions, the image may appear coarse or may not be
corrected properly.
• You can correct recorded images (p. 161).
• You can also set the camera so that turning the y ring changes the DR
Correction or Shadow Correct settings (p. 121).
• Not available in or mode.
Dynamic Range Correction (DR Correction)
• With and , the ISO speed will return to even if you set a speed
higher than .
• With , the ISO speed will return to even if you set a speed lower
than .
• With , the ISO speed will return to even if you set a speed lower
than .
COPY