Filter
Top Products
103
You can change the number of seconds the image is displayed on the
LCD monitor after being captured.
1
Select [Review time].
¡Select the <z> tab.
¡Hold down the <X> button and
turn the <5> dial to select [Review
time]. Then let go of the button.
2
Select the desired setting.
¡Hold down the <X> button and
turn the <
5> dial to select the desired
setting. Then let go of the button.
Image Review Time
The [Hold] setting will set the review time to half of the auto power off (p.35)
time. If auto power off is [Off], the image review time will be 15 min.