Canon 1Ds Digital Camera User Manual


 
104
Vertical shots can be rotated automatically so that they are displayed
upright during playback.
Auto rotate will work only with vertical images captured while
[Auto rotate] was [On]. Auto rotate will not work with vertical
images captured while [Auto rotate] was [Off].
1
Select [Auto rotate].
¡Select the <c> tab.
¡
Hold down the <
X
> button and turn
the <
5
> dial to select [
Auto rotate
].
Then let go of the <
X
> button.
2
Select the desired setting.
¡Hold down the <X> button and
turn the <
5> dial to select [On]. Then
let go of the button.
3
Take a vertical shot.
¡
For the image review right after image
capture, the image will not be displayed
vertically on the LCD monitor.
4
Playback the image.
¡Press the <V> button.
s The vertical shot will be displayed
vertically as shown on the left.
3Auto Image Rotation
If the vertical image is taken while the camera is pointed up or down, the
image might not rotate automatically for playback.
When you change the camera’s orientation between horizontal and vertical,
the camera orientation sensor will make a small sound. This is not a defect.