Filter
Top Products
27
The camera can operate only after the <4> switch is turned on.
<
2> : The camera is turned off and
does not operate.
<
1> : To turn on the camera, set to
this position.
<
d> : This is the same as <1>
except that the beeper sounds
when focus is achieved in the
One-Shot AF mode or with
manual focus.
Basic Operation
Power Switch
¡ To save battery power, the camera turns off automatically after 1 minute
of non-operation. (p.35) To turn on the camera again, just press the
shutter button halfway.
¡ If you turn the <
4> switch to <2> while the captured images are
being recorded onto the memory card, the remaining number of captured
images to be recorded will be displayed on the top LCD panel. When all
the images are finished recording, the display will turn off and the camera
will turn off.