Filter
Top Products
39
Mastering
the Basics
E
Playing Back on a TV Screen
You can connect the camcorder to a TV or VCR to play back your recordings on a TV
screen.
❍ Make sure that “H” is not displayed on the screen. If “H” is displayed on the
screen, change the setting ( 37).
❍ When you use the TV as a monitor during recording, keep the TV volume
turned down as long as the camcorder’s audio terminals are connected. An
unpleasant high-pitched squeal, called feedback, may be produced if sound
from the TV speakers is picked up by the microphone.
For high picture quality, we recommend using a TV with an S (S1) terminal.
TVs with SCART Terminal
Refer also to the TV or VCR instruction manual.
1. Turn off all devices before starting the connections.
2. Connect the PC-A10 SCART adapter to the TV or VCR’s SCART terminal.
3. Connect the STV-250N Video Cable to the camcorder’s AV terminal and
the audio/video terminals on the SCART adapter.
Connect the white plug to the white AUDIO terminal L (left), the red plug to the red
AUDIO terminal R (right) and the yellow plug to the yellow VIDEO terminal.
AV
AUDIO
(L/ MONO)
AUDIO
(R)
VIDEO
Signal flow
STV-250N Stereo Video Cable
(supplied)
PC-A10 SCART
Adapter (supplied)
2_D73PAL_E(13-42) 02.12.26 9:22 PM Page 39