Canon MV600i Camcorder User Manual


 
73
Using the Full Range
of Features
E
Using the DM-50 Microphone (Optional)
The high sensitive Directional Stereo Microphone DM-50 attaches to the
advanced accessory shoe for cable-free operation and is powered by the camcorders
power supply. Use it for recording or dubbing audio.
Refer also to the DM-50 Microphone instruction manual.
Always turn the camcorder off before attaching/removing the microphone.
Do not connect any microphone to the MIC terminal when the DM-50
Microphone is connected.
Do not carry the camcorder by the microphone.
1. Slide the microphone into the
accessory shoe until it clicks.
2. Tighten the fastening screw.
Be careful that the microphone does not
come off when tightening the screw.
3. Set the camcorder to CAMERA or
CARD CAMERA mode.
(Connection) appears.
4. Set the microphone’s directivity
switch.
• SHOTGUN: For recording clear sound from
the front (monaural).
• STEREO 1: For recording sound from the
front and surrounding area.
• STEREO 2: For recording surrounding
sound in a wider range than in
STEREO 1.
MV650i
q
e
w
r
OFF
(VCR)
PLAYPLAY
CAMERACAMERA
3_D73PAL_E(43-85) 02.12.26 9:26 PM Page 73