Filter
Top Products
70
Using the Full Range
of Features
E
Audio Recording
Changing the Audio Mode
You can record sound in two audio modes—16-bit and 12-bit. The 12-bit mode records
sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new
sound later. Select the 16-bit mode for higher sound quality.
* MV650i/MV630i/MV600i only.
Open the menu and select [AUDIO SET UP]. Select [AUDIO MODE], set it to
[16bit] and close the menu.
“16 bit” appears for approximately 4 seconds.
For adding new sound, see Audio Dubbing ( 95).
Recording with an External Microphone
You can use an external microphone for
recording. Almost all stereo microphones with
a plug diameter of 3.5 mm can be connected
to the MIC terminal. Use a microphone with a
built-in power supply (condenser
microphone).
❍ The audio level differs from that of the built-in microphone.
❍ Be careful with long microphones as they may appear in the picture.
❍ See also Using the DM-50 Microphone ( 73).
❍ Do not use a microphone cable longer than 3 m to avoid electromagnetic
interference.
MV650i
CARD PLAY (VCR)
CARD CAMERA
PLAY (VCR)*
CAMERA
AUDIO MODE••12bit
AUDIO SET UP
MIC
( 43)
3_D73PAL_E(43-85) 02.12.26 9:26 PM Page 70