Filter
Top Products
40
Mastering
the Basics
4. If connecting to a TV, set the input selector to VIDEO. If connecting to a
VCR, set the input selector to LINE.
The SCART Adapter PC-A10 is for output only. For analog line-in recording or
analog-digital conversion, please use a SCART adapter with input capability
(commercially available).
TVs with S (S1)-Video Input Terminal
Refer also to the TV or VCR instruction manual.
1. Turn off all devices before starting the connections.
2. Connect the S-150 S-video Cable (optional) to the S-video terminals.
3. Connect the STV-250N Stereo Video Cable to the camcorder’s AV
terminal and the audio terminals of the TV/VCR.
Connect the white plug to the white AUDIO terminal L (left), and the red plug to the
red AUDIO terminal R (right). Do not connect the yellow plug.
4. If connecting to a TV, set the input selector to VIDEO. If connecting to a
VCR, set the input selector to LINE.
E
VIDEO
S(S1)-VIDEO
INPUT
AUDIO
L
R
S
DV
AV
Signal flow
S-150 S-video Cable (optional)
Signal flow
STV-250N Stereo Video Cable (supplied)
2_D73PAL_E(13-42) 02.12.26 9:22 PM Page 40