Filter
Top Products
75
Using the Full Range
of Features
E
Adjusting the Focus Manually
Autofocus may not work well on the following subjects:
1. Set the program selector to Q.
2. Adjust the zoom.
When you operate the zoom after adjusting the focus, the
subject may not stay in focus. Adjust the zoom before the focus.
3. Press the FOCUS button.
“MF” appears.
4. Turn the selector dial to adjust the focus.
Turn the selector dial up or down until the image appears
focused.
5. Press the FOCUS button to return to autofocus.
The setting resets to autofocus when you switch the program selector to [.
CARD PLAY (VCR)
CARD CAMERA
PLAY (VCR)
CAMERA
Subjects with
Reflective surfaces low contrast or Fast Moving Subjects
Through dirty or
wet windows
without vertical lines