Canon 300 Camcorder User Manual


 
89
Editing
E
Recording from Analog Video
Devices (VCR, TV or Camcorder)
You can record videos or TV programs from a VCR or analog camcorder on the tape in
the camcorder.
Anomalous signals sent from the connected device may be recorded as
anomalous picture (although it may not appear so on the screen), or it may not
be recorded at all.
You cannot record from tapes with copyright protective signals.
Headphones cannot be used during analog line-in recording. If the
AV/headphones terminal set to [PHONES H], it will automatically switch to [AV].
1. Connect the camcorder to the analog video device.
See Playing Back on a TV Screen ( 39).
2. Set the camcorder to PLAY (VCR) mode and load a blank cassette.
3. Connected device: Load the recorded cassette.
4. Press the REC PAUSE button.
In record pause mode and during recording, you can check the
picture on the screen.
5. Connected device: Play back the tape.
6. Press the e/a button when the scene you wish to
record appears.
7. Press the 3 button to stop recording.
• Press the e/a button to pause recording.
• Press the e/a button again to restart recording.
8. Connected device: Stop playback.
CARD CAMERA
CARD CAMERA
PLAY (VCR)
CAMERA
(
L
I
N
E
-
I
N
)
R
E
C
P
A
U
S
E