Filter
Top Products
122
appears.
The symbol will display when
using a memory card that had
print settings or transfer
settings set by other DPOF-
compliant cameras.
z Be careful when making changes to the print or
transfer settings with other DPOF cameras,
because all such settings will be overwritten by
your camera (pp. 105, 111, 114).
Noise displays./Subject's movements are irregular.
The camera automatically
brightened the image displayed
on the LCD monitor (or
viewfinder) to make it easier to
see when shooting in a dark
area (p. 19).
z There is no effect on the recorded image.
Shooting
Camera will not record.
Camera is in Playback or
computer/printer connection
mode.
z Turn the mode lever to the left or press the shutter
button halfway to switch to Shooting mode.
z During a computer or printer connection,
disconnect the interface cable before switching
the camera to Shooting mode.
Flash is charging. (Blinking
white on LCD monitor/in
viewfinder).
z Wait until stops blinking and lights steadily,
signaling that the flash is charged, then press the
shutter button.
Memory card full. z Insert a new memory card (Basic Guide p. 1).
z If required, download the images to a computer
and erase them from the memory card to make
space.
Memory card is not formatted
correctly.
z Format the memory card (p. 35).
z If reformatting does not work, the memory card logic
circuits may be damaged. Consult the nearest
Canon Customer Support Help Desk.
SD memory card is write
protected.
z Slide the write protect tab of the SD memory card
upward (p. 133).