56
Saving Original Images
Not only can you save images with altered colors when shooting still
images with the Color Accent or Color Swap modes, but you can
also choose to save the original images (before the color change).
1 (Rec.) menu [Save
Original] [On]/[Off]
*
.
See Menus and Settings (p. 27)
z
If [On] is selected, the images will be
saved as consecutive file numbers.
The original image will be the lower
file number, while the image shot in
Color Accent or Color Swap mode will be the higher file number.
* Default setting.
If [Save Original] is set to [On]
zOnly the image set with Color Accent or Color Swap is
displayed on the LCD monitor (or viewfinder) during
shooting.
zThe image displayed on the LCD monitor (or viewfinder)
immediately after shooting is the one shot with Color
Accent or Color Swap (pp. 53, 54). As erasing the image at
this time will cause the original image to be erased at the
same time, be careful.
zAs two images are saved with each shot, the number of
recordable shots displayed on the LCD monitor (or
viewfinder) will be half the number that is displayed when
[Save Original] is set to [Off].