Filter
Top Products
Bracketing in continuous mode < Extra Photo Operations < Main Menu
Bracketing is the practice of making several exposures of a scene, with each
exposure differing from the next by predetermined steps in exposure or focus
settings. Bracketing is used to easily capture a range of exposures so that the
best exposure can be selected at a later time. Bracketing is also used to create
a series of exposures which will be combined using methods such as HDR
processing.
The bracketing features are enabled when the camera drive mode
is set to continuous, and custom timer with some models.
!
! ! Usage Tip: If you wish to fire off individual frames and still have
! ! bracketing for each one, after the first shot lightly let-up on the
! ! shutter button to a half- press position. The next full-press will
! ! give you another bracketed shot. This process may be repeated
! ! for as many bracketing steps as you need. Giving you finer
! ! control over the number of bracketed exposures you may require.
Set camera Custom Timer in Canon® Menu
See Bracketing notes: Page 49.
•
TV bracketing value [Off, 1/3 – 4 Ev]
Set this value to bracket via exposure time. A value of 1 will
double or halve the exposure time for the following exposures.
!
•
AV bracketing value [Off, 1/3 – 4 Ev]
Set this value to bracket via aperture. A value of 1 will open or
close the aperture by 1 stop for the following exposures.
•
Subj. Dist. Bracket Value [0 – 100]
Set this value to enable focus bracketing. This feature is only
enabled during manual focus mode. This feature allows you to specify the manual focus !distance
in millimeters. This value is multiplied by the Value factor below to arrive at the !final value.
•
Value factor (mm) [Off, 1, 10, 100, 1000]
Used as a multiplier for Distance bracketing value.
11