Filter
Top Products
3 Direct Printing with DPOF
138
ACP Direct / SBubble Jet Direct
¡ Set the [Style]. (p.123/126)
5
Start printing.
¡ Turn the <5> dial to select [OK],
then press <0>.
s The printing will start.
¡ To stop the printing, press <0> while
[Stop] is displayed, then turn the
<5> dial to select [OK] and press
<0>.
¡ When printing with a PictBridge or Bubble Jet Direct printer, be sure to
set the paper size.
¡ With PictBridge, the file No. cannot be imprinted.
¡ If [Bordered] is set, the date might be imprinted on the border,
depending on the printer.
¡
The date might look light if it is imprinted on a bright background or border.
¡ With CP Direct, if [Print Type] is set to [Index], the number of images
printed on one index sheet will be as follows:
• Credit card size: 20 images
• L size: 42 images
• Postcard size: 63 images
As for the number of index images with Bubble Jet Direct, see the BJ
printer’s instruction manual.
¡ If you stopped the printing and want to resume printing the remaining
images, select [Resume]. Note that printing will not resume if you stop
the printing and any of the following occurs:
• Before resuming the printing, you changed the print order settings.
•
Before resuming the printing, you erased an image that was to be printed.
• In the case of index printing with CP Direct, you changed the paper
cassette before resuming the printing.
• In the case of index printing with PictBridge, you changed the paper
settings before resuming the printing.
•
When you stopped the printing, the CF card’s remaining capacity was low.
¡ If there is a printing problem, see page 122 for PictBridge, page 125 for
CP Direct, or page 128 for Bubble Jet Direct.